Technical tools
Instrumentation, automation and control: calculate, check and take the result into the field.
Calculator
4–20 mA
Current, percentage and engineering values.
One scale, all the values.
PID tuning
Which Kp, Ti and Td should go into the PLC?
Simple and advanced modes, live simulation, step test, IMC/Lambda and Ziegler-Nichols in the device convention.
Open calculatorDP level range
Which LRV and URV should go into the DP transmitter?
Open tank, dry leg and wet leg, with an interactive tank and report.
Open calculatorPT100 calculator
How many ohms should I read at this temperature?
PT100, PT500 and PT1000; 2, 3 or 4 wires; IEC 60751 classes.
Open calculatorThermocouple calculator
How many mV match this temperature?
Eight types from NIST ITS-90, cold junction compensation and colour guide.
Open calculatorTemperature calibration sheet
How do I record this sensor calibration?
Configurable points, reference/indication pairs and a PDF field sheet.
Prepare sheetPressure calibration sheet
How do I take the pressure points to the field?
Gauge, absolute or differential, with paired readings and PDF.
Prepare sheetpH calibration sheet
How do I document buffers and readings?
Actual buffers, lot, expiry and solution temperature.
Prepare sheetFlow calibration sheet
How do I compare the meter with the reference?
Master meter, volumetric or gravimetric, with supporting data.
Prepare sheetWeighing instrument calibration sheet
How do I organise the weighing instrument tests?
Indication by load, repeatability and eccentricity.
Prepare sheet